150watt Monocrystalline Sillicon Panel Solar, Photovoltaic Solar Panel 125*125 or 156*156 Solar Cell Solar Module
- Warranty: 10 Years
- Application: Light Industry
- Certification: UL
- Power: 150W
- Specification: 1480*670*30
- HS Code: 85414020
- Number of Cells: 36pcs
- Condition: New
- Material: Polycrystalline Silicon
- Trademark: BAODIGOLDSUN
- Origin: China
|Glass,Type and Thickness||Ultra-white,Low Iron,Tempered Glass 3.2mm|
|Junction Box||IP65,Pass TUV|
|Cable Type,Diameter and Length|
|Frame||Aluminum alloy of silvery white|
|Resistances||227gsteel ball fall down from 1m height and 60m/s wind|
|(Standard test condition:AM1.5,1000W/M2,25ºC)|
|(We can guarantee 5 years with 100% performance guarantee,10 years 90% rated power output,25 years 80% rated power output.)|
Features of poly solar module:
1.High efficiency solar cells with high transmission and textured glass are delivering high efficiency for modules;
2.Bypass diode minimizes the power drop caused by shade;
3.Tempered glass, EVA resin, and weatherproof film, plus aluminum
frame for extended outdoor use;
4.Modules independently tested to ensure conformance with certification
and regulatory standards;
5. Manufacturing facility certified to ISO9001 quality management system standards.
Description of every parts:
1.Junction Box in proof-water with TUV Certificate
2.Bypass Diode Rated 45V&15A
3.Solar Cable & Connector: 4m² MC 4connector with TUV Certificate
4.Toughed Glass: The glass is super white cloth grain of toughened glass , the thickness of 3.2mm , the solar cell spectral response range of wavelengths (320-1100 nm), light transmittance over 91% , Ultraviolet light radiation , light transmittance is not falling .Toughened glass is made of components can withstand 25 mm in diameter of hockey hit at a speed of 23 m/s.
5.EVA: 0.5 mm thickness with high quality EVA film as sealant of solar cell and and the connection between the glass, TPT agent. With high light transmittance and anti-aging ability. Solar cell encapsulation of EVA film after curing performance requirements:
Light transmittance is greater than 91% ; Crosslinking degree is during from 70 to 90% ; Peel strength (N/cm), glass/film is more than 30 ; TPT/film is more than 15 ; Temperature resistance is from - 40° C to 85° C.
6.TPT BackSheet: the back of the solar panel, ageing resistance , corrosion resistance , resistance to ultraviolet radiation, airtight, etc. Basic requirements.
7.Frame: aluminum alloy frame with high intensit , mechanical shock resistance ability.Strong, lightweight aluminum frame design with reinforced sealing and load hold to prevent freezing and warping, and stand against high wind.